HUA Huachang Screw Factory Speak Characteristics of Automatic Locking Screw

HUA Huachang Screw Factory Explains the Characteristics of Automatic Locking Screw

The future development direction of automatic locking screw must be intelligent

The future development direction of automatic locking screw must be intelligent. The Internet era has put forward slogans such as smart home, intelligent ecology and intelligent robots, which shows that intelligence should enter every corner of society. The most basic automatic locking screw is the guarantee to ensure the realization of this series of slogans. If the automatic locking payment of screws cannot be realized, the concept of intelligence cannot be put forward. The state advocates the transformation and upgrading of enterprises, triggering opportunities for the development of spiral industry, it also reverses the technological innovation of the spiral industry. Without innovation, there will be no competitiveness. The technological innovation of the spinning machine lies in the intelligence of the equipment. Across the invisible technological fortress, it must be a new and brilliant page.

automatic locking screw function:

1. The automatic locking screw is suitable for screws of various specifications. It has a wide range of use and reduces the purchase cost. 1.0-5 special screws 1:1 short screws and washers screws can be used. The track adjustment is easy, and the track of the screw can be pulled out to adjust.

2. There is no screw card phenomenon. The screw moves in the roller and falls off the funnel. All the screws that have not entered the track are removed by the roller and enter the next cycle. The operation size can be adjusted freely.

3. Change the speed arbitrarily, adjust the feed speed with screws, and shake the position of the point before and after, without affecting the work efficiency.

4. The fault alarm function, feed and vibration drive are independently controlled, and the ideal delay stop time can be set freely. In abnormal cases, the screw will start the fault alarm.

Automatic counting function:

Automatic locking screws can count the total number of screws locked by a worker every day.

2. In production, sometimes screw leakage occurs due to the negligence of the operator. Set the number of screws to be locked for each product. After reaching several systems, an alarm can be issued,

3. Alarm function When there are phenomena such as insufficient materials, empty materials, floating teeth, etc. in production? Does the system receive a signal to send an alarm? Remind workers to pay attention.

4. The signal input port is equipped with a mechanical arm, which can improve the wide application of the spinning machine.

5. Do not repeat the unique signal mode of incoming materials, which can prevent two screws from shooting out of the spiral body. Only by tightening the first screw can the second one be transmitted.

6. The double-threaded channel has a discharge channel after the special-shaped thread is screened to ensure the normal operation of the threaded tube.

7. Jianchao promotes unique transportation mode.

HUA Huachang Screw Factory has explained here today. If you need automatic locking screw machine, please contact us HUA Huachang Screw Factory. We are manufacturers without middlemen and have advantages in price. HUA Huachang Screw Factory wishes everyone a happy life!