Cup head screw multi-station processing device

The existing cup head screw multi-station processing device has the following disadvantages:

1. When the cup head screw processes the workpiece, the multi-station is discontinuous, and the workpiece position needs to be moved many times for processing, which is inconvenient for processing;

2. The workpiece needs to be clamped and rotated many times during the processing. In the existing device, the position of the workpiece is fixed after fastening, which is inconvenient to use. To this end, we propose a multi-station cup head screw processing device.

Technical points: technicians provide a cup head screw multi-station processing device, in which the rolling cutter, cutting piece, turning device and hexagonal punch are all installed on the support frame, corresponding to the fixed position of the workpiece, and the workpiece can be punched, turned over, cut and tapped continuously in the process of rotating with the worktable, which is convenient for processing. The turntable rotates with the motor A in the worktable, the electric telescopic rod on the turntable drives the clamping block close to the fixed block to clamp the workpiece, which can facilitate the disassembly or rotation of the workpiece during processing.

The cup head screw multi-station processing device adopts the following specific technical solutions: a cup head screw multi-station processing device includes a support frame, the top end of the support frame is provided with a telescopic rod A, and the bottom end of the telescopic rod A is connected with the thread rolling cutter gap; The telescopic rod A is located on the right side of the cutting piece; The surface of the support frame is provided with a telescopic rod B, which is detachably connected to the cross frame; Motor C. A hexagonal punch is installed on the right side of the top end of the support frame, and the hexagonal punch is located above the worktable; a plurality of turntables are slidably connected in the worktable; the rotation shaft B is connected at the bottom of the turntable; the motor A is detachably connected to the rotation shaft B; the surface of the turntable is fixedly connected with a fixed block; the fixed block and the clamping block are both provided with clamping grooves; the electric telescopic rod is connected with a gap, and the electric telescopic rod is installed on the turntable.

The motor a is installed at the bottom end of the workbench, and the bottom end of the workbench is intermittently connected with the rotating shaft a. The motor B is detachably connected with the rotating shaft a, and the motor B is mounted on the bottom end of the support frame. The telescopic rod a comprises an inner tube, an outer tube and a gear box, the gear box is located below the outer tube, and the inner tube is slidably connected to the outer tube. The current input ends of the telescopic rod a, the telescopic rod B, the electric telescopic rod, the motor a, the motor B, the motor c and the electromagnet are electrically connected to an external power supply through wires.

The beneficial effects of the above-mentioned cup head screw multi-station processing device are: a cup head screw multi-station processing device: a wire rolling cutter, a cutting part, a turning device, and a hexagonal punch are all installed on a support frame, and the workpiece Corresponding to the fixed position, during the rotation of the worktable, the workpiece can be punched, turned over, cut, and tapped in sequence, which is convenient for processing; the winding knife, the cutting tool, the turning device and the hexagonal punch are installed on the support frame in a certain order, and the bottom ends of the winding knife, the cutting tool, the turning device and the hexagonal punch correspond to the position of the workpiece to be processed.

The rotation of the motor B drives a plurality of workpieces on the worktable to rotate, and the workpieces pass through the hexagonal punch, the turning device, the cutting tool and the wire rolling tool in turn during the rotation. The motor drives the electromagnet to rotate and turn the workpiece. After turning over, the workpiece contacts the cutter to cut; after cutting, the thread roller taps the workpiece lightly. The workpiece can be processed continuously during the rotation of the worktable, which is convenient for processing.